Matching Contractors with the Right Bond Company

Author, Andy Roberts, Account Executive, Rancho Mesa Insurance Services, Inc.

Like any great match-maker, a surety bond agent needs to fully understand both parties in order to match the contractor with the right bond company. 

In a previous article, we explored key factors that a contractor should consider when hiring a surety bond agent, highlighting experience, some additional value adds, and agent appointments. Agent appointments are an important factor to consider, because one of the most important roles of a surety bond agent is making sure that their clients are paired with the right surety bond company. In order to do this, an agent needs to have an in-depth understanding of both their client’s business and the bond companies that they work with.    

In order to properly match a client with a bond company, it is vital that the agent take the time to really understand the client’s business: review financials, review the business plan, and get a firm handle on what the contractor’s goals are for the company. Doing this will allow the agent to get a thorough understanding of the client’s specific bond needs and will help them narrow down the marketplace to a handful of bond companies that would be the right fit. While it is very important to have a good understanding of the client’s business, it is equally important to have a strong understanding of each bond company’s appetite.

There are more than 100 bond companies out there and they are all a little different. They all have different limitations with regard to the size of bonds they can write. They will have different underwriting standards for when a client is required to start providing CPA-reviewed financials. They have different classes of business that they favor. Some bond companies value personal financials more than others. This list goes on, making it vital that agents have a thorough understanding of their markets, and have good relationships with their underwriters so that clients are placed with a bond company that will be a good partner for them as they look to accomplish their goals. 

It is important that an agent have appointments with a variety of highly rated bond companies while also possessing a deep understanding of those markets because contractors need to be able to trust that their agent has them placed with the bond company that is the right fit for their business. Rancho Mesa has long-standing appointments with over 20 highly regarded bond companies, in addition to close working relationships with those underwriters. 

As you look to build a successful bond program that can help your construction firm grow profitably, contact me at aroberts@ranchomesa.com or by phone at (619) 937-0166.

Best Practices for Growing Your Surety Program

Author, Anne Wright, Surety Relationship Executive, Rancho Mesa Insurance Services, Inc.

You may know that the surety client/agent/underwriter relationship is different from other lines of insurance.

Whether you are new to the bonding process, or have been doing bonded work for years, there is a handful of important items that can assist with securing the best relationship for your bonding needs. It boils down to a few key areas: timely information, accurate information, and regular communication.

For contractors who only need small or infrequent bonds, communication may be very basic and minimal. For example, if we establish your support with a surety who has an “express program,” these programs are based on clean, personal credit and perhaps some track record of completed projects. So, there may not be a need for as much communication as there would be if an account is in a more “standard” or “preferred” program. We always want to understand and share details on the jobs you are looking to do, and have completed, but there’s generally no need for a personal relationship with the underwriter in these types of programs.

Once you are established with a more standard surety relationship, the timely information the surety expects to receive is key. However, with regular and clear communication, we also hope to add value to the relationship between our clients and the underwriter in support of the contractor’s needs. 

Communication about financial information will ensure that proper attention is given to the accurate details that confirm important benchmarks. Questions like: does equity track? is the operation profitable? how is the cash looking? are percentage of completion entries noted and match what’s on the work in progress report (WIP)?

Regular communication will not only include this financial information, but also conversations about the work you have completed and the work you will complete. Be prepared to provide trends from year to year, profitability year-to-date, and specific information on current or completed jobs noted on the WIP (whether certain jobs are bonded or not). All of this information is designed to better understand your operational processes and goals, thus presenting the most complete information to the surety.

Being proactive in this relationship is always our goal. We will do our best to facilitate the information that is needed, and work to share the information that will facilitate the best support for you.

We are your advocate with the surety underwriter – and happy to facilitate these conversations and/or meetings to ensure that your surety needs are adequately addressed and met.

Regular and open communication with your surety agent and underwriter, like any relationship, is a Best Practice that will serve us all well.

To discuss your surety program, contact me at awright@ranchomesa.com or (619) 486-6570.

Take Advantage of Contractor Express Bond Programs

Author, Matt Gaynor, Director of Surety, Rancho Mesa Insurance Services, Inc.

Several years ago, I put together an article on various credit driven surety bond offerings that require a one-page application to qualify for bonding. Quick and simple! At that time, the maximum limits offered by various carriers was $350,000 for a single bond.

Last week, I received separate emails from two of our partner surety carriers offering single bond programs of $600,000 and $750,000, respectfully. Again, these quick and easy bond offers are solely based on personal credit scoring. In other words, if the owner of a construction company pays their personal bills, then they most likely will have the ability to qualify for a decent-sized bond.

There is no need for company financial statements to qualify for bonding in these programs. Instead, the contractor completes a “fast” application requesting personal financial information about the owner(s). The bond company will run the personal credit of the owner(s). If the personal credit is decent, the bond will be approved. A response is provided within 24 hours of submission. 

The program responds to requests for bid bonds, performance and payment bonds, and letters of bondability. Several carriers provide a “pre-qualification” feature so you can determine if you will qualify for the bond before you bid or negotiate a project that will require a bond. This pre-qualification feature is helpful for owners that are concerned they may have low credit scores.

The standard premium rate for these programs is 3% of the contract amount. Based on the strength of your personal credit, and the type of work you are looking to bond, we have seen this lowered to 2%. 

Therefore, if you are considering a project that requires a bond and you are not a big fan of collecting a lot of paperwork for one project – don’t fret. We may have a solution to help you win that job.

If you would like more information on how to qualify for these programs, please contact me at (619)937-0165 or mgaynor@ranchomesa.com.

Managing Your Surety Relationship for 2023 and Beyond

Author, Andy Roberts, Account Executive, Rancho Mesa Insurance Services, Inc.

Over the past two years, there has been a lot of talk about a looming recession. If a recession happens, its severity remains to be seen, but regardless, it is important for contractors to be taking an active approach in building their relationship with their bond company and utilizing the services of a surety specific agent. 

Surety companies are conservative and err on the side of caution when it comes to providing bonds, which makes it imperative that the contractor build a strong relationship with their management and underwriting teams. Annual meetings should be conducted, as this provides the underwriter valuable insight into the company while also allowing them to build a more personal relationship with the contractor. Additionally, it is important that there is regular communication between all parties throughout the year regarding the contractor’s financials and performance on jobs, as this type of discussion can help build trust between both parties. This may seem pretty standard, but it is not easily accomplished unless a contractor is working with a surety broker that specializes in the bonding industry.    

The surety industry is specialized and relationship driven, which makes partnering with the right broker even more critical as the country moves into unprecedented financial times. Effective brokers know each carriers’ appetite; they have relationships with those underwriters and should be able to easily determine which surety will be able to provide a program to match the contractor’s needs. This type of knowledge and experience can greatly benefit a contractor in the event the economy begins to turn and surety markets begin to limit capacity and/or pull back from offering bond programs.    

In this most uncertain time, contractors should begin building and, in some cases, re-building their surety relationships. With considerable work lined up in Southern California over the next few years, strengthening these bond programs can allow for maximum capacity and potentially profitable growth. 

For any questions about managing your surety relationships or to discuss if we can assist with any bond-related needs, contact me at aroberts@ranchomesa.com or call my direct line at (619) 937-0166.

Utilize Payment Bonds as a Backstop for Getting Paid

Author, Anne Wright, Surety Relationship Executive, Rancho Mesa Insurance Services, Inc.

Contractors may do their work and meet their contractual obligations, but on some jobs it’s harder to get paid than on others. As in any business, your collection activities are key to getting your money. Don’t be afraid to be a squeaky wheel. There are a couple of things I’d like to share as either a reminder, or perhaps an education, that all contractors should know and consider.

Know where your money is coming from. If you are working on a public works job, it is of course coming from the public agency/owner of the job. If you are working on a private job, there are more questions to be asked.

If you are working as a general/prime contractor or a sub-contractor on a private works project, always confirm the financing – always. Make sure you document your job file with information as to where the money is coming from, and specifically cover your scope/line items of work. There may be a construction loan. If so, you will typically obtain that information for your preliminary notice purposes. If not, don’t hesitate to ask for some verification as to where the funds are held. Your surety will commonly pursue the source of the financing, if you are asked to bond the job. 

What do you do if you are struggling to collect what you are owed? First and foremost, be aware of what your basic payment protections might be.

Your most likely assurance of payment for undisputed work would be the payment bond. Payment bonds are a primary protection to sub-contractors and suppliers if they are working for a prime contractor who has had to provide their bonds to the owner. There is an investigative process in the event of a claim against the bond, but the surety is there to make sure all valid claims are paid.

Sub-contractors, if you are working for a general contractor, you will want to make sure you get a copy of any payment bond that might be held by the owner for the general contractor’s work.  

Suppliers, you may have payment bond protection as well, depending on who you are working for on the job and the type of job (i.e., federal, public or private).

Public works project bonds are required on most public works jobs of $35,000 or more (but can vary by agency) and Federal jobs of $150,000 or more.

Private works project bonds are rarely required of the general contractor, but it is important to ask if they are to document your job file. Otherwise, your best options are the stop notice to the lender and/or mechanic’s lien.

Best practice here is to always ask for a copy of the payment bond from your general contractor. Confirm one has been provided to the owner if you are a sub-contractor or supplier. If you are a lower tier sub-contractor, find out if the sub-contractor you are contracted with had to provide a bond and obtain that for your job file! If you are a supplier, ask about those payment bonds that might protect you as well.

What if a payment bond isn’t in place to cover you? There are various remedies short of litigation that may be available to you. These include mechanic’s lien filings, and/or stop notice to the lender/owner of a project. 

Mechanics lien can be used if the job is on private property (needs to be recorded with the county recorder). At the very least, this puts you in a generally secured position on the title of the property when it is sold. It’s not a quick remedy, or even guaranteed payment, depending on other liens already filed ahead of you.

Stop notice may be useful if the project is for private works (filed against the construction lender). This notifies the lender that you are owed money. You will have to file a bond to accompany your stop notice, but when properly filed, it requires that the lender withhold monies until your matter is resolved. Again, there is a process involved here and it’s often not a quick remedy, but it should be considered.

If you are working on a private job and there is no payment bond filed on the project, the stop notice and/or mechanics lien are key.

It's important that you know your lien rights and filing times whether you are working on a public or a private project (the various protections have certain timetables, e.g. after notice of completion, etc. that have to be considered for you to have rights to these various remedies). If you are a member of a trade association, you no doubt have a member who is an attorney. They can provide the current timelines for the various lien rights. We can also offer referrals to construction attorneys who can provide you with the timetables for the purposes of these various filings or related support.

Pursuing these remedies are best practices. It doesn’t hurt to file the preliminary notice on any job when you begin your work. Everyone is entitled to managing their relationships the way they see best for their business, but hopefully some of this information will be helpful.

If you have questions about payment bonds, contact me at (619) 486-6570 or awright@ranchomesa.com.

Five Things to Know Before Your Annual Surety Meeting

Author, Matt Gaynor, Director of Surety, Rancho Mesa Insurance Services, Inc.

November is the month that I meet with our contractor clients to discuss how the current year will end up and begin planning for the next year. We will also touch base regarding the items our surety carrier partners will want to hear about when we schedule our annual meetings (after the December 31, 2022 financial information is available).

Similar to having an open book test, if our contractor knows in advance what will be requested, they can prepare accordingly and anticipate any “red flag” type items that might be of concern for the bond company. Below is a general list:

1. Items on the balance sheet with an emphasis on cash, accounts receivable, borrowing against the bank line of credit, and equity.

   An aging schedule of the accounts receivables will be very helpful to determine what amount is in excess of 90 day collections.

2. The revenue and net profit or net loss from the income statement to reflect if 2022 was a profitable or losing year. Also, a discussion of any Paycheck Protection Program (PPP) money that was loaned to the contractor and if the entire amount was forgiven in 2022.

3. They will review the work in progress and completed contract schedules to discuss which projects were successful and others that lost money. Be prepared to provide additional detail on any problems connected with losing projects and steps taken to correct this on future work.

4. Potential new opportunities you anticipate in 2023. Will any of these projects exceed your current program, contain work outside your normal scope or geographic territory? Be prepared to address how you will manage additional risk that may be a concern to the bond company.

5. Tax Planning. What additional withdraws do you anticipate to cover taxes, etc.?

If you would like more information on how your bond carrier might analyze your 2022 financial information, please contact me at (619)937-0165 or mgaynor@ranchomesa.com.

Blockchain Technology May Further Digitalize the Surety Industry

Author, Andy Roberts, Account Executive, Rancho Mesa Insurance Services, Inc.

In my previous article and podcast, “Surety Industry Forced to Innovate,” I discussed a few technological advancements within the surety industry and how the ultimate goal would be issuing bonds to obligees digitally. While that is still some ways off, the technology is here and there are companies and organizations already exploring how blockchain technology may be the answer when it comes to fully digitalizing the surety industry.    

Simply put, a blockchain is a shared digital ledger that records transactions between parties and is permanent and verifiable. Applying this method to the surety industry, an electronic record (i.e., bond) would be created and shared with all parties to the bond, and any changes to that bond would be automatically added to the record so that every party who has access to it can see the history of the changes. This type of technology and the fact that it’s an immutable record, would alleviate the need for wet signatures, raised seals, and notary acknowledgements, which would increase the speed at which bonds can be issued, while also cutting some costs that are associated with issuing hard copy bonds. As mentioned, these systems are still being developed, but there are companies and surety organizations that are actively working to make this technology commonplace within the industry.   

The Institutes launched the Institutes RiskStream Collaborative, which has spearheaded the effort to introduce blockchain technology to the surety industry. 

“The power of attorney use case was the logical starting point and we’re excited to advance it forward. We are also excited that it will lead to many more downstream use cases, including Bond Signature and Verification,” said Patrick Schmid, vice president of the RiskStream Collaborative. 

Institutes RiskStream Collaborative started by piloting a program digitalizing the power of attorneys and this is now moving into its second phase. This initiative has garnered support from major surety associations like The International Credit Insurance & Surety Association, the Surety & Fidelity Association of America, the National Association of Surety Bond Producers. 

Rancho Mesa is committed to utilizing technology and strives to always be at the forefront when it comes to advancements and changes in order to help our clients stay ahead of the curve. And, while issuing bonds digitally using blockchain technology won’t be happening tomorrow, there are bond companies in Europe along with the Institutes Riskstream Collaborative that are testing the process. And, its participants view this as the future of issuing bonds, which makes it an important topic for us to address and monitor. 

For questions about technology in surety or your surety needs, contact me at aroberts@ranchomesa.com or call my direct line at (619) 937-0166.

Changes Are Coming to California Contractor License Bonds

Author, Matt Gaynor, Director, Surety Department, Rancho Mesa Insurance Services, Inc.

Currently, all contractors licensed in the State of California are required by the Contractors State License Board (CSLB) to have a $15,000 contractor license bond on file with the state. This amount has been in effect since January 1, 2016.

Effective January 1, 2023, State Bill 607 will require the contractor license bond amount to increase from $15,000 to $25,000 (California Business and Professions Code Chapter 367).

If you are a contractor and currently have a $12,500 bond of qualifying individual (BQI) for your company, the BQI bond is also required to increase to $25,000 effective January 1, 2023.

Although we have several months to get this in place, touch base with your bond agent to discuss the timing of the increase relative to the anniversary date of your CSLB bond.

You may be required to pay a prorated additional premium to cover the increase.

The term of your bond may be prorated, which would change the renewal date.

Bonding companies may not offer renewals on their current bonds. If this is the case with your bond company, you will need to put a new bond in place on the effective date of the cancellation.

If you would like more information on how your particular CSLB bond might be affected, please contact me at (619) 937-0165 or mgaynor@ranchomesa.com.

Five Contract Provisions to Consider

Author, Anne Wright, Surety Relationship Executive, Rancho Mesa Insurance Services, Inc.

When the surety provides the performance and/or payment bond required by a contract, that contract is the basis of the surety’s guarantee. Simply put, the bonds follow the contract. Because of this, there are a few key things that the surety is going to want to review, and you should do the same. The goal is to make sure you, as the contractor, have everything in place to ensure your success. 

1. Liquidated Damages

Typically, contracts will have a liquidated damages provision. This is generally the per day penalty imposed in the event you are the cause of a delay for the completion of the project. If you are acting as a subcontractor and can only find vague verbiage in your contract with the general contractor (GC), it probably implies that you are held to the same liquidated damages as the GC is to the owner. Make sure you know the actual value or dollar amount of the liquidated damages and consider your bid amount accordingly. Just because you don’t see a dollar amount per day in the contract doesn’t mean you won’t be held to that flow down provision from the prime contract.

Private jobs may be more flexible. Most all public jobs will have something in the prime contract about liquidated damages and they can get pretty steep. We’ve recently seen invitations for bids that include $40,000/day liquidated damages. How many days delay would it take to eat up your profit on a given job? If you do run up against these higher liquidated damages, consider either conditioning your bid to include verbiage that either caps those liquidated damages to some dollar amount that is reasonable, or include a provision that you will only be responsible for a proportionate share of the liquidated damages based specifically on your work that may have caused any delay.

2. Retention

The standard retention for public works contracts in California is 5% for the prime contractor as a result of the efforts of our subcontractors association. Notably, this standard practice is scheduled to sunset in 2023. There is a bill in Sacramento to make the standard permanent. You can bet groups are lobbying to support the 5% standard as it has proven to be a good number.

Knowing the standard retention is important when negotiating your contract. If you are a subcontractor to a GC on a public works project, review the contract for the retention provision. You may be agreeing to abide by a percentage that is higher than what the GC is having withheld by the prime contract. For example, you may be asked to agree to a 10% retention instead of the standard 5%. That is a business decision you can make, but at least you know the law and consider it in your negotiations.

On private works projects, the owners can set their retention amount. And, we continue to see that being set at 10% for the prime contracts.

3. Indemnity

California law sets a limit to some extent on what one party can be liable for to another party. That said, some contracts may be out of date (i.e., broad form indemnity was the law of the land years ago), or the contract may have been drafted in another state. So, make sure that your indemnity provision clarifies that in no event will your duty to indemnify the other party be greater than what is defined as your scope in your contract and that you are not responsible for work performed by other trades.

4. Insurance Provisions

Insurance requirements are greater in some contracts than others. Limits of liability needed can change from contract to contract. It is best practices is to have your insurance agent review the contract before you sign. Make sure you have the coverages you need and include the cost in your contract amount. We’ve seen umbrella limits increasing with some public and private owners, so account for those increases.

5. Warranty

The standard warranty for workmanship in California is one year after completion. We do see some public owners wanting to extend that to a two-year warranty. In some trades and in some contracts, it might be longer. When presented with a longer term warranty, ask yourself if it is reasonable to expect you will be in a position to respond to a warranty item in X number of years after completion. We strongly suggest that you limit the warranty to no more than two years. In some cases, where bonds are required, the surety may ask for verbiage to be added to the contract to limit the surety’s liability to one or two years, and we will then include that in the bond form, if the provision exceeds the two years.

I have always held the belief that knowing a good construction-oriented attorney is as important as any other professional service provider you have to support your business. Consider that it is probably cheaper to have an attorney review your contract before you sign it, then to be put in a position to have to defend yourself later. A good legal resource can provide valuable input if you come across something new, or not well understood. We have some good resources that we can recommend. Contact me at (619) 486-6570 or awright@ranchomesa.com if you would like to discuss your surety needs or if we can provide other resources to support your business.

Surety Industry Forced to Innovate

Author, Andy Roberts, Account Executive, Surety Group, Rancho Mesa Insurance Services, Inc.

Rarely are the words surety and technology advancement synonymous, and that’s because it’s hard to introduce advancements to an industry where so many obligees still require raised seals and wet signatures on the bonds they are receiving. However, due to some challenges that bond companies, insurance agencies and obligees have faced during the pandemic, the industry is being forced to innovate. E-signatures on bond documents are becoming more commonplace, and electronic powers of attorney and digital seals are being adopted with the eventual goal of creating a surety bond creation process that is wholly digital.  

General Indemnity Agreements executed by a contractor/principal when they are establishing a surety program with a bond company, have traditionally needed to be executed in front of a notary and the original document, with the wet signatures, provided back to the bond company. Now, more and more bond companies are moving away from this archaic practice and allowing these documents to be signed digitally. This is an important change as it shows the industry’s willingness to implement changes that are in the best interest of the principal. Another change that is being brought about is the use of electronic powers of attorney (POAs), and digital seals.

A couple of years ago, very few bond companies utilized electronic POAs, opting instead to mail agents hard copies that needed to be dated using a typewriter. While this method is still being used, more and more sureties are opting to provide their agents with e-POAs that they can print as needed. In addition to this change, digital seals are also starting to be more commonplace. These can be affixed to the POAs and the bonds themselves when they are transmitted digitally. The importance of these two changes is worth noting as they are steps towards creating a process which allows for the creation of a surety bond by solely electronic means. 

Getting to a point where contract bonds are done only electronically is still a way off, but the technologies that are needed are available, making it necessary that the surety industry continues to embrace technology to improve our processes, and to ensure we are providing bonds in the form, whether electronic or paper, that clients and obligees want. 

For questions about technology in surety or your surety needs, contact me at aroberts@ranchomesa.com or call my direct line at (619) 937-0166.

Construction Law and the Future of the Industry With Carlin Law Group

Rancho Mesa's Director of Surety Matt Gaynor interviewed Kevin Carlin of Carlin Law Group on Wednesday, March 23, 2022 to learn about his background, where he started his law career, and current hot topics in the construction industry. Kevin is a well-respected construction attorney here in Southern California who represents a number of Rancho Mesa clients.

One topic of discussion centered on payment disputes.

MG: Are you seeing a lot of payment disputes right now?

KC: No, as your listeners know, the construction economy is on fire right now as there has been a ton of money sloshing around as a result of low interest rates and stimulus. While there are a few payment lawsuits going on right now, contractors seem to be more focused on getting the next job rather than chasing the money they are owed on the last job. Most of my cases right now seem to involve demands for defense and indemnity on large complex public, commercial and hospitality projects. These cases are highlighting how important, and frightening, indemnity language in prime contracts and subcontracts is, and how important it is to have good insurance. Most contracts contain indemnity language where if you are 1% at fault, you agree to pay 100% of the liability. Most people in the construction industry do not know about this or appreciate this risk because it’s never a problem until it’s a problem. These are the risks that make it so important to have the right coverages and policies of insurance, which is where you guys come in.

Listen to the full episode to learn more about Kevin and the Carlin Law Group.

What to Consider When Hiring a Bond Agent

Author, Andy Roberts, Account Executive, Surety Group, Rancho Mesa Insurance Services, Inc.

With the passage of the Infrastructure Investment and Jobs Act, there is $125 billion of federal funds available for procurement. This provides a significant amount of federal construction work which will be put out to bid, with a vast majority of it requiring bonding. For contractors that may have never bonded before or bond infrequently, this is a clear opportunity to build revenues. With that in mind, it is critical that these contractors have a good surety bond agent on their side to help them navigate this process. Here are some questions and things to look for when evaluating if an agent is the right fit.

Experience  

It is important to note how many years an agent has been in the industry, but it’s more important to make sure they are a surety specialist. Surety bonding is a very specialized insurance product, and an agent that focuses solely on surety will have a better understanding of what the different bond companies value when they are reviewing a new contractor because each bond company has a different appetite. Additionally, agents that focus solely on surety will have developed stronger relationships with bond companies. This relationship is important because bond companies want to work with agents that are knowledgeable and have good reputations within the industry. 

Agent Appointments

Which bond companies does the agent have an appointment? This is an important question to ask, as bond companies are very conservative and the better bond companies are much more selective with the agents that they appoint. When asking this, it is also important to note how many bond companies the agent is appointed with. Having access to numerous sureties, while maintaining key relationships with the main companies, allows an agent to find the best bond company for each contractor.

Additional Value Adds

Surety bonding is a complicated industry, and if a contractor's goal is to increase their bonding capacity, it is vital that the agent provide additional services, like a detailed review of the company’s financials, and yearly analysis of a contractors single and aggregate bond limits. These services are important because they help the agent and the contactor get on the same page with regards to the current bond program, while also allowing them to game plan for the future, and set goals for how to increase bonding capacity. In addition to these in-house services, an agent should be able to recommend a good construction CPA and reputable banking contacts that know what a contractor needs to maximize their bond credit.

Bond agents play a vital role and partnership for contractors, which makes it very important that a contractor performs proper due diligence when hiring an agent. At Rancho Mesa, we have surety only specialists whose expertise is used to ensure our clients are placed with the right bond company to suit their needs. 

To answer any questions from this article or discuss if we can assist with any bond related needs, contact me at aroberts@ranchomesa.com or call my direct line at (619) 937-0166.

How Improving Equity Impacts Your Bond Program

Author, Andy Roberts, Account Executive, Surety Group, Rancho Mesa Insurance Services, Inc.

In our current series of articles, we are taking a deeper look into the properties of a balance sheet that will affect a contractor’s bonding capacity. We have previously discussed bonding capacity and summarized working capital in regards to the impact it can have on a contractor’s capacity. However, another very important component on the balance sheet that surety underwriters will consider is net worth, also referred to as equity.

Equity is calculated by subtracting a company’s total liabilities from their total assets on the balance sheet, and is a measurement that is used to determine their long term liquidity. From a bonding standpoint, surety underwriters love to see equity increase year after year. They analyze each item in the equity section of the balance sheet such as common stock, additional paid in capital, and shareholders’ loans. One item that carries a particularly large amount of weight is retained earnings.

Retained earnings represents the net income or profit that a company reinvests in its business after distributions are paid to the shareholders. This is important because as a general guideline we say a contractor can qualify for an aggregate bonding capacity that is ten times their company’s equity. Thus, their retained earnings heavily influence the overall equity of the company. Contractors looking to maintain a strong bond program, or increase their bond program, will want to retain as much profit in the company as they can. This allows their retained earnings and their equity to continue to grow through the years, making it even more important to have a knowledgeable and proactive bonding agent on your side. This should be someone who understands your business and overall goals, can analyze your balance sheet, and will discuss strategies with you to reach optimal capacity.

For many contractors, building a strong bonding capacity can create opportunities for significant revenue growth. Perhaps one of the more critical elements to note as you review your balance sheet is being educated on the importance of having strong retained earnings inside your financials. You can start this process and leapfrog your competitors when you request a quick capacity analysis from our surety team. They’ll provide you with a detailed evaluation.

To answer more questions about your bonding program, contact me at aroberts@ranchomesa.com or call my direct line at (619) 937-0166 and we can get started.

Closing Your Bond Liability – Understanding the Consent of Surety Document

Author, Matt Gaynor, Director of Surety, Rancho Mesa Insurance Services, Inc.

The project our contractor client was required to bond has been completed and they are looking to get their final payment and collect their retention. But the owner or general contractor is requiring a Consent of Surety document from our contractor. What is a consent of surety and why is this document required?

The Consent of Surety document is used by the owner to check with the bond company to determine if any claims or notices have been filed with the bond company that the owner may not be aware of. The form states:

The surety hereby approves of the final payment to the contractor, and agrees that final payment to the contractor shall not relieve the surety of any of its obligations to the owner.

Essentially, the bond company agrees that they still have responsibility for the contract even after final payment has been made.

Prior to approval of this document, the bond company will typically request the final contract amount of the bonded project. They may also request that the owner complete a bond status form to determine if any problems/complaints might have occurred on the project.

Once they are satisfied that the project has completed in good standing, they will authorize the bonding agent to issue the Consent of Surety document. They will also invoice for any additional bond premium if the contract increased in size.

For more information on the requirements for a Consent of Surety document and how it pertains to your contract, please contact me at (619) 937-0165 or mgaynor@ranchomesa.com.

A Contractor’s Guide to Bonding Capacity

Author, Andy Roberts, Account Executive, Surety Group, Rancho Mesa Insurance Services, Inc.

For contractors that do a lot of bonded work, their bonding capacity is a critical element of their business. Capacity often determines which projects a company can and cannot pursue, so it is managed very closely. However, for contractors that are new to bonding or have not bonded previously but remain interested in performing bonded work, this is likely a foreign concept to them. So, what is bonding capacity, and what items determine the amount of capacity that a surety carrier is willing to offer?

Generally speaking, a contractor’s bonding capacity is comprised of single and aggregate limits, where the surety underwriter will approve performance and payment bonds for a job, up to the single limit. The aggregate limit is the cap that the surety carrier sets for how much total bond liability a contractor can have extended at one time. Having these caps is what makes it important for contractors to have an understanding of what information sureties use when determining how much capacity to offer. Underwriters will look at personal and business credit, industry experience, as well as personal financial wealth. Typically, though the most important item a surety underwriter will focus on is the company’s financials, specifically, their balance sheet and income statement. 

When reviewing the balance sheet and income statement, two important items that an underwriter will be reviewing are the contractor’s working capital and their equity. We took a deeper dive into working capital in a previous article, but simply put, working capital represents a contractor’s current assets minus current liabilities, and this measures how much a company has available to pay its current debts. Equity, or net worth on the balance sheet, is made up of retained earnings, common stock and additional paid in capital, and these numbers provide a measure of the long term liquidity of a company. Surety carriers take a hard look at this number because they want to ensure that there are sufficient reserves to complete the work that they have issued performance and payment bonds on.    

Building an effective bonding program can take time and requires collaboration with competent, trusted advisors. Determining what type of bonding capacity you can establish and/or deserve is a key part of the process. To find out what your bonding capacity looks like, request a quick capacity analysis and I will provide you with the information you need for your company. To answer more questions, you can email be at aroberts@ranchomesa.com or call my direct line at (619) 937-0166. Stay tuned for my next article which will take a deeper dive into strategies for improving equity and how this can increase capacity.

Funds Control May Secure Project Bond

Author, Andy Roberts, Account Executive, Surety, Rancho Mesa Insurance Services, Inc.

As surety brokers, we initiate bond programs for our construction clients. Single and aggregate limits are determined in large part by their financials and experience. Often, there are jobs that exceed the single limit we have in place, or are larger than any job that our client had previously completed. When it is a job that makes sense for the contractor, it is our job to work with the bond company and find a solution so the contractor can bid the job or take on the contract. One available solution is a process referred to as funds control.

Funds control is a service that bond companies use to ensure funds involved in the project will be used for appropriate work-related expenses. This arrangement involves a third party company engaged to handle the disbursement of the funds to the different sub-contractors and suppliers on that specific project. In order for this to be set up, the contractor is required to execute two documents, a Disbursement Agreement and an Irrevocable Direction of Funds. 

The Disbursement Agreement addresses the specific terms agreed upon by the contractor and the third party company and also details the responsibilities of both the contractor and the funds control company. The second document, the Irrevocable Direction of Funds, is a one-page document that requires the project owner, or the general contractor, to send all payments directly to funds control. Once the funds are received, they are placed into a project specific bank account that is set up in the contractor’s name. The payments are then disbursed to the sub-contractors and suppliers based on the pay applications that the contractor submit to funds control. And, while this adds some additional steps and work to the process, there are benefits to funds control and good reasons why the bond company will require it on certain projects. 

For the bond company, with a third party taking control of the distribution of funds, there is a much lower risk of financial mismanagement, and subcontractors, suppliers and vendors can expect to be paid for the work that they do, which leads to a lower risk of payment bond claims being filed against the contractor’s bond. 

While adding funds control to a project adds some additional work and steps to the job, it can be a valuable alternative route and one that contractors should gain familiarity. In many cases, funds control can be the solution that helps get a surety underwriter comfortable with supporting a bond for a particular job that otherwise would not be approved.

For more information or for any questions regarding your surety needs, please contact me at (619) 937-0166 or aroberts@ranchomesa.com.

2021 Insurance Game Plan

Author, Dave Garcia, President, Rancho Mesa Insurance Services, Inc.

As we come to the end of 2020, the most challenging year most of us have ever experienced, where COVID-19, wild fires and other natural disasters took their toll emotionally, physically, mentally and financially on all of us, we can only hope for a brighter 2021.

The insurance industry did not escape the impact of COVID-19 and the natural disasters, either. Insurance companies, along with their reinsurance companies, suffered catastrophic losses as a result. As with many industries, there will be lagging actions that will take place in 2021 to help these companies in their efforts to recover.

While there really isn’t a line of insurance that wasn’t impacted, the lines of insurance that suffered the greatest losses and impacts include:

• Property

• General Liability

• Excess/Umbrella

• Workers’ Compensation

• EPLI

• Cyber Liability

• Surety

• Employee Benefits

For this article, I will limit my discussion to the property and casualty lines and leave surety and employee benefits to another day.

To offset these losses, I anticipate any number of steps insurance companies will take as we move into 2021. But, let me just touch on those that I think will have the greatest impact and need for attention to business owners in 2021. 

Let’s review these and I will try and give you a small sampling of the implications for each action.

• Non-renewing policies

  • Carriers in many cases will not offer renewal terms.

• Reducing coverage limits and terms

  • Increasing deductibles, lowering aggregate limits particularly in the excess/umbrella marketplace.

• Add new exclusions

  • Businesses will start to see “communicable disease” exclusions added to various lines of insurance.

• Increase underwriting information needed

  • A higher emphasis on information particularly as it relates to a business’s policies and procedures to mitigate COVID-19.

• Raise premiums

  • This is the ultimate consequence and one we are all anticipating to see beginning in early 2021.

To many businesses, this will seem daunting and hopeless - one more hurdle to overcome to keep their businesses going. However, there are proactive steps you can take to mitigate these circumstances and have a strong year despite the adversity.

I’m a firm believer in being pro-active and not re-active. Following are steps you can take to meet this challenge head on:

• Meet with your insurance advisor 90-120 days from your renewal date.

• Understand the specific challenges you will be facing.

• Create a strategy on how to approach the insurance marketplace to ensure the most cost effective and comprehensive risk management program.

• Review and enhance your existing safety program. Rancho Mesa offers our RM365 Advantage Safety Star™ certification program. This is a comprehensive web-enabled training course designed to enable your employees from supervisory to front-line workers to be trained and certified in safety best practices. The insurance marketplace already places a high value on these types of safety trainings and certifications, so this will help your company’s productivity through fewer claims but also position you in a more favorable position in the marketplace.

• Benchmark your company’s safety performance to your industry and see which areas you are outperforming your peers and areas that need your attention. Rancho Mesa offers a benchmarking report we call StatTrac™ to our clients or to other companies who want to see where they stack up.

To close, let me reassure you there is light at the end of the tunnel for 2021. Be proactive; start 90-120 day out from your renewal; don’t let insurance issues sneak up on you; attack them head on and I believe you can make 2021 a great year for you and your company.

If you have any questions or want any help in devising a plan and you are a construction company, please reach out to Sam Clayton, our Construction Group Leader at sclayton@ranchomesa.com. If you are in the human services industry, schools, non-profit, healthcare, assisted living, etc., please reach out to Sam Brown, our Human Services Group Leader. And finally, we can be reached at (619) 937-0164 or at our website, www.ranchomesa.com.

I really believe there is no limit to what you can do – best of luck in 2021.

Get Your Bond Account in Shape for 2021 – A Surety Company Perspective

Author, Matt Gaynor, Director of Surety, Rancho Mesa Insurance Services, Inc.

As we wind down the 2020 year, it is important for our contractor clients and prospects to start planning how the 12/31/2020 fiscal year end financial statement will look. The bond companies will use this information to set your 2021 Bond Credit Line for approval of your projects.

I recently sat down with two industry executives from Argonaut Surety, Steve Parnas, Vice President and Contract Practice Leader, and James Bluzard, Vice President and Chief Underwriting Officer-Contract to discuss the required financial information to ensure our contractors maximize their available bond credit going into 2021. Listen to the entire podcast Episode 56 “How to Get Your Surety Bond Account in Shape for 2021” on your favorite app.

Below are a few excerpts from our recent Podcast:

Rancho Mesa Matt Gaynor: “Although you track our contractor’s financial numbers throughout the year - how important is the 12/31 year-end financial statement?”

Arogonaut James Bluzard: “The 12/31 statement is typically a CPA-prepared statement viewed as the most important statement from the surety underwriter perspective since it is coming from an independent third party. Given the uncertain economic times we are in, and with COVID out there, getting that statement out and into your underwriters hands earlier rather than later will be really important to let the underwriters see how 2020 closed and also to get a forecast regarding 2021, as well.”

Rancho Mesa Matt Gaynor: “Within the CPA document, what are some of the specific items and schedules you are looking to analyze?”

Argonaut Steve Parnas: “We actually start our analysis at the back of the document looking at the work in progress and completed job schedules, which gives us insight into the performance of the past year along with how they are positioned going forward. Also, looking at the receivable and payable schedules to see how they are collecting their money and paying their bills.”  

To get a better understanding of how the bond carriers will analyze your underwriting documents during these uncertain times, please contact me at (619) 937-0165 or mgaynor@ranchomesa.com.

Early Warning Signs of COVID’s Impact on Surety

Author, Andy Roberts, Account Executive, Surety Department, Rancho Mesa Insurance Services, Inc.

The COVID-19 pandemic will have many long and short term effects on the surety industry. While the long term effects might not be known for years, some short term changes are already occurring. Early on, we have witnessed bond companies start to tighten their underwriting guidelines, and now we are seeing an increase in General Contractors (GC) requiring performance and payment bonds from their subcontractors. 

For contractors that do a lot of public works, or work with GCs that require bonds already, this is not an issue, as they have already established bond programs and understand the process. However, for contractors that have never been required to bond before the pandemic, they are thrust into a part of the construction insurance world that is foreign to them. So, what exactly are performance and payment bonds and why are so many contractors now being asked to provide them?

To put it simply, the performance bond is an assurance to a project owner, or in this case a GC, by a surety company, that the contractor is capable and qualified to perform the contract and protects the GC from financial loss if the contractor fails to perform in accordance with the terms and conditions agreed upon. The payment bond assures that the contractor will pay certain subcontractors, workers, and materials suppliers associated with the project. While these assurances are meaningful, GCs very often do not require bonds because of the extra cost associated with obtaining them. Bonds typically cost 1-3% of the contract price with the GC in many cases paying the corresponding premium. COVID-19 has created turmoil in the financial marketplace many ways including a tightening of available money, a lengthening of account receivables, high unemployment, and an overall slowing of the economy. With so much uncertainty surrounding the effects that COVID-19 may have on an individual  contractor’s financials, GCs are becoming more risk adverse and willing to absorb the cost of the bond to avoid subcontractor defaults in the middle of the project. In those situations the GC can then rely on the surety company that wrote the bond who will step in to make sure the work is completed.  

For contractors that have never secured a bond before, the process can seem daunting, complex, and invasive, which makes having a good surety agent and bond company vital to help make the process seamless. At Rancho Mesa, we work with a number of high quality surety markets that provide a variety of different types of bond programs, and we have the expertise to get you set up with one that works best for your company’s surety bond needs.

For more information or for any questions regarding your surety needs, please contact me at (619) 937-0166 or aroberts@ranchomesa.com.

Why Am I Now Required to Bond Such Small Construction Projects?

Author, Matt Gaynor, Director of Surety, Rancho Mesa Insurance Services, Inc.

I received an email from a large Subcontractor client last week requesting performance and payment bonds in the amounts of $87,000 and $133,000, respectively. This client has completed projects in excess of $5,000,000 in the past and was surprised that the general contractor they were working with was requiring such a small amount to be bonded back.

I explained the potential reasons for why the general contractor may require such a small bond.  

• One reason might be with the financial uncertainty created by the COVID-19 pandemic, the prime contractor/general contractors’ bond company is looking to transfer some of the risk from the bond they provide to their prime contractor. They may set a certain limit (for example, all subcontracts over $100,000) to require the subcontractor to bond back to the prime contractor.

• A second reason might be that the prime contractor has not used a certain subcontractor in the past and wants the protection of a bond to help offset the risk. The general contractor might have selected this subcontractor based on “price” and wants the third party prequalification that the performance and payment bond provides.

• A third example could be that the trade this subcontractor supports is critical to the success of the project and the general contractor is using every tool they can to manage the risk.

Overall in 2020, we have seen an increase in the number of prime contractors requiring a bond for a small subcontract.

The good news for the subcontractor that rarely requires bonding is that the qualification process for a small subcontractor bond is relatively easy. A number of highly rated bond companies provide programs for bonding projects up to $400,000 (sometimes higher) based on the credit scoring of the subcontract company owner.

If you would like more information on how a professional bonding agent can assist in putting a single bond or a bond program in place for your company, feel free to reach out to me at (619) 937-0165 to ensure your company is getting the proper attention.